Catalogue

Air Compressors

Air compressors made in Italy, engineered by La Padana. Contact us for current availability and lead times.

Italian air compressors engineered by La Padana Air Compressors. The EC 270/3M is a 270 L, 3 HP single-phase unit with an airflow of 390 L/min. The PR 900/10 TTD is a 900 L unit with twin 10 HP motors, 20 HP in total, an airflow of 2,420 L/min, and is built for continuous industrial duty.

2 products

Compare the range

Figures are from each product's datasheet. A dash means the datasheet does not state it.

ProductTankAirflowMotorSupplyDuty
Air Compressor EC 270/3M270 L390 L/min3 HP, 2.2 kW230V single-phaseNot stated
Air Compressor PR 900/10 TTD900 L2,420 L/minTwin 10 HP, 20 HP totalNot statedContinuous, industrial-grade

Reading a compressor specification

Three figures decide whether a compressor fits the job: how much air it delivers, how much it stores, and what supply it needs.

Airflow (L/min)
The volume of air the compressor delivers per minute. Add up the air consumption of every tool that will run at the same time, and choose a compressor above that total.
Tank capacity (L)
The compressed air held in reserve. A larger tank evens out demand, lets the motor rest between cycles, and suits tools that draw in bursts.
Motor (HP / kW)
Motor power. 1 HP is about 0.75 kW.
Single-phase
Runs from a standard 230V supply, as in most workshops.
Three-phase
Runs from a 400V industrial supply, usual for large compressors.
Continuous duty
Built to run for long periods without the rest intervals a light-duty compressor needs.

Source: General guidance on compressor specifications. Product figures are from Spartan datasheets.

Questions

How do I choose the right size air compressor?

Start with airflow: total the air consumption of every tool that will run at once and choose a compressor that delivers more than that. Then choose the tank: a larger tank suits tools that draw air in bursts and lets the compressor cycle less often.

What power supply do Spartan compressors need?

The Air Compressor EC 270/3M runs on 230V single-phase. The datasheet for the Air Compressor PR 900/10 TTD does not state its supply, so ask us before you order.

Where are Spartan air compressors made?

The Air Compressor EC 270/3M and Air Compressor PR 900/10 TTD are made in Italy and engineered by La Padana Air Compressors.

Can you supply air compressors to my site?

Yes. Spartan supplies air compressors to buyers in Bahrain, the United Arab Emirates and Saudi Arabia. Add the products you need to an enquiry with quantities and your delivery location, and our team will reply within 3 working days with availability and pricing.