Catalogue

Hand Protection

Cut, chemical and impact rated gloves: PU, nitrile, latex and leather, sizes 7–12.

Work gloves for general handling, cut, impact, chemical and welding work: PU and nitrile coated knit gloves (the Grip Guard GP1, GP3 and GP5, Flex-Fit and Nitrile Coated Gloves), the para-aramid Cut Flex, the Impact Ultra D, the nitrile Chem Guard for chemical handling, latex coated gloves, and cow split leather welding and rigger gloves.

Gloves tested to EN 388 show their full code in the table below and on their own page. In that code an X means the glove was not tested for that property, never that it passed.

12 products

Compare the range

Figures are from each product's datasheet. A dash means the datasheet does not state it.

ProductEN 388 codeCoatingLiner or material
Grip Guard GP14131XPU coating100% Nylon
Grip Guard GP33X42BPU coatingHPPE, Steel, Polyester, Spandex
Grip Guard GP54X43DPU coatingHPPE, Steel, Polyester, Spandex
Flex-Fit4131ANitrile Microfoam15 gauge nylon, R-PET, spandex
Chem Guard4101XNot statedNitrile Rubber + Lining: Flockline
Cut Flex2X44CNot statedPara Aramid
Impact Ultra DNot statedSandy Nitrile coatingPolyester
Latex Coated GlovesNot statedCrinkled latex + Color: Grey, BluePolyester
Leather Welding GlovesNot statedNot statedCow split leather
Leather Rigger GlovesNot statedNot statedCow split leather + Single palm
Leather Welding SleevesNot statedNot statedSplit leather + Size: 22ˮ
Nitrile Coated Gloves4121XGrey nitrile13 gauge white polyester

Reading an EN 388 code

EN 388 is the European standard for gloves that protect against mechanical risks. Its code is a row of characters in a fixed order, and each position is a different test.

1st · Abrasion
Resistance to abrasion, level 0 to 4.
2nd · Blade cut
Cut resistance in the circular-blade (coup) test, level 0 to 5.
3rd · Tear
Tear resistance, level 0 to 4.
4th · Puncture
Puncture resistance, level 0 to 4.
5th · TDM cut
Cut resistance in the ISO 13997 straight-blade test, level A to F. Where the circular blade dulls on high-cut materials, this is the reference result.
6th · P (optional)
Impact protection over the knuckles, when tested.
X
Not tested, or the test does not apply. An X is never a pass.
0
Tested, and below level 1. Different from X.
EN ISO 374-1 Type A, B, C
Chemical protection: Type A resists at least six listed chemicals for 30 minutes or more each, Type B at least three, Type C at least one for 10 minutes or more. The letters after the type name the chemicals.

Source: EN 388:2016+A1:2018 and EN ISO 374-1:2016+A1:2018, Protective gloves.

Questions

What does 4121X mean on gloves?

It is an EN 388 code: abrasion level 4, blade cut level 1, tear level 2, puncture level 1, and X for the straight-blade cut test, which means the glove was not submitted for it. It is the rating of our Nitrile Coated Gloves.

What does X mean in an EN 388 rating?

X means the glove was not tested for that property, or the test does not apply to it. It is not a pass and not a fail: nothing is claimed. A 0 is different; it means the glove was tested and scored below level 1.

Why do some gloves have a cut number and others a cut letter?

EN 388 has two cut tests. The second character is the circular-blade test, scored 1 to 5. The fifth is the ISO 13997 straight-blade test, scored A to F. High-performance cut materials can blunt the circular blade, so for cut-resistant gloves the letter is the more reliable figure.

Which Spartan gloves are for chemical handling?

Chem Guard is tested to EN ISO 374-1 for chemical protection. The Grip Guard GP1, Grip Guard GP3 and Grip Guard GP5 are general handling gloves, and their datasheets state they are not for thermal, electrical or chemical protection.

Can you supply work gloves in bulk?

Yes. Spartan supplies work gloves in bulk to buyers in Bahrain, the United Arab Emirates and Saudi Arabia. Add the products you need to an enquiry with quantities and your delivery location, and our team will reply within 3 working days with availability and pricing.